A few weeks ago I came across this picture of the most FABULOUS necklace I've ever seen:
(found on www.therubricator.tumblr.com, original source unknown)
I was totally in love with everything about it, from the little vintage frames, to the old pictures and the way the chain hangs... And I decided: I got to make this myself! How cool would it be to be able to wear a collage of old family photo's around my neck?! So I tried to look for the creator of this little piece of heaven for some instructions, but alas, couldn't find her. So since I couldn't trace the source, I decided to go out on a limb and throw something together of my own, using the photo above as an example.
For this project I used:
- bronze-look chains with small shackles (eBay)
- silver-look chains with bigger shackles (eBay)
- copper colored rings (eBay)
- vintage looking lock (www.bellavictoria.nl)
- about 19 small photo frames in various shapes and sizes (eBay)
- mod podge dimensional magic (local craftstore)
- regular glue
- old family photo's (my granny's)
- scotch tape
and a lot of patience :).
Step 1: cut the pictures in the sizes of the frames. (Make sure the frames you choose aren't too big, because you have to make sure the necklace will fit your neckline when wearing it, and bigger frames mean less movement. I chose to use frames from app. 4x3cm max. This means the inner diameter is about 2x3cm.) If the pictures are really old, scan them and print them out so you won't have to cut up the originals. If you choose to print them out, you can also experiment a little with the colour-scheme (sepia, black & white, etc) to see what fits your necklace best. I went with a mixture of sepia and black and white, to add more randomness.
Step 2: to avoid wrinkling and bubbles, 'plasticize' the cut out photo's by covering them in scotch tape (both sides), and cut out again. This also prevents the ink from leaking when using the Mod Podge Dimensional Magic later on.
Step 3: Using just a little glue, glue the plasticized photo's in the frames, making sure they fit properly. This is of importance because the Mod Podge has to take well, so you don't want anything to stick out of the frame. The glue is used to keep your photo's from wandering when you Mod Podge them.
Step 4: Add a coat of Mod Podge Dimensional Magic, filling up the entire frame. To avoid bubbles, start by outlining the inner circle of the frame and work your way inwards with a circular motion. If it looks a little milky, don't worry, this will be gone when it dries. If you do see any bubbles floating in there, try to burst them with a needle when the Mod Podge is still wet. Let them dry for at least 2 hours before proceeding to the next step.
(the freshly mod podged frames still look milky, but my masterpiece is coming together!)
Step 5: This is the hard part: shaping your necklace. Because your neck isn't a flat surface, you want it to follow your collarbones and such. What worked best for me, is laying the pictures out in the order I want to attach them. Working in rows is the most practical way: lay out about 5 vertical rows in the following order:
3, 3, 2, 3, 2, 3, 3, (so row 1: 3 frames, row 2, 3 frames, etc. see picture below).
This way the necklace will fit the lines of your neck. Make sure to scatter the various sizes of the frames, make it look very random. Try to put the heavier pieces on top, and use 1 heavier frame on the bottom in the middle to influence the way the necklace hangs. Other than that, you can put any frame, anywhere.
Step 6: When you're satisfied with the composition of your necklace, attach all the frames together using the bronze chains and rings. Don't worry if you find out the composition as you lay out doesn't work, just undo the chains and try again. I had to take it apart about 10 times before being satisfied with the shape. When you're done with connecting the frames, you use the bigger, thicker silver chain on the left and right end of the necklace, to support the weight of the frames. As a finishing touch: add hanging bronze chains from the bottom, draping them from frame to frame, and add a vintage looking lock.
This was the end result of all my hard labour:
It has a snug fit in the end, but I rather like that. I feel very fashionable when wearing it, almost like royalty :P. It looks very impressive, and I get a lot of compliments on it.
I hope you guys enjoyed this post. If you do decide to make your own, please post a picture of it, I'm dying to see what everyone came up with! :D



No comments:
Post a Comment